TODAY'S  MOST  POPULAR  HEADLINES

Banshee 1.5.5 Released With Grid View, YouTube Plu ...

Health check: Mandriva

The Secret Origin of Windows

Fedora Dhcp Server

Pygrub& install Solaris (build>75) DomU at Fedora 8 Dom0 (64-bit)

02/22/2008  
Relevance: 15.38
Procedure descibed bellow attaches Solaris DomU to libvirtd's daemon subnet 192.168.122.0 (netmask 255.255.255.0) utilizing interface virbr0 and dnsmasq service as DHCP server. It doesn't require DHCP bridge and external DHCP Server to turn on old fashion xen-bridging on F8 Dom0.
Search further

How to Install and Configure DHCP Server in Ubuntu Server

12/22/2008  
Relevance: 14.85
How to Install and Configure DHCP Server in Ubuntu Server. A DHCP Server assigns IP addresses to client computers. This is very often used in enterprise networks to reduce configuration efforts. All IP addresses of all computers are stored in a database that resides on a server machine.A DHCP server can provide configuration settings using two methods
Search further

How To Set Up A DHCP Server For Your LAN

09/24/2006  
Relevance: 14.76
This tutorial describes how to set up a DHCP server (ISC-DHCP) for your local network. DHCP is short for"Dynamic Host Configuration Protocol", it's a protocol that handles the assignment of IP addresses, subnet masks, default routers, and other IP parameters to client PCs that don't have a static IP address. Such computers try to find a DHCP server in their local network which in turn assigns them an IP address, gateway, etc. so that they can connect to the internet or other computers from the local network.
Search further

DHCP server can take over client

07/16/2009  
Relevance: 12.28
Specially crafted DHCP servers can take control of a PC if the PC is running the DHCP client supplied by the Internet Systems Consortium (ISC) (dhclient). This is the default set-up in Ubuntu, BSD and many other Linux distributions. According to an ISC advisory, the vulnerability is based on a buffer overflow that allows attackers to inject arbitrary code into a system and execute it at root level. The buffer overflow can be triggered in the script_write_params method using excessively long server-supplied subnet masks.
Search further

dhcp-lb: Load balance with DHCP links

08/22/2009  
Relevance: 12.21
So, you have read lartc's guide on'Routing for multiple uplinks/providers' and it all makes sense (and does work). However, there's a catch for you: Instead of having static network configurations, your ISPs use DHCP to set your network connections and you don't intend to sit all day long waiting for DHCP event to happen to reconfigure the whole thing, do you? That's what I thought
Search further

How To Set Up DHCP Failover On Centos 5.1

06/27/2008  
Relevance: 12.17
This tutorial will walk you through setting up DHCP failover on CentOS 5.1 using the default ISC dhcp server, this can easily be adapted to any other Linux distro out there. You will most likely need failover in environments where network down time can not be tolerated. My home is running a DLNA setup so I need my devices to be able to obtain network parameters at all times.
Search further

Squid Proxy Server On Ubuntu 9.04 Server With DansGuardian, ClamAV, And WPAD

07/04/2009  
Relevance: 11.26
This tutorial will demonstrate how to set up a Squid Proxy server on Ubuntu 9.04 Server with DansGuardian (for content filtering) and ClamAV (for Virus scanning); in addition, we will set up Web Proxy AutoDetection (WPAD) through DHCP (in this case, the Windows Server 2003 DHCP server) or DNS so that the only configuration necessary on the client side is to check"Auto-detect proxy settings for this network" in Firefox or Internet Explorer. At the end of the tutorial, users will have a fully functional and secure proxy for HTTP access.
Search further

Tweaking dhcp client configuration to change the default DNS servers to Open DNS

08/14/2009  
Relevance: 10.19
The DNS servers of my ISP is always behaving erratically. The DNS look up times are abysmally large and some times I get an address not found error while browsing. On ubuntu/debian systems the DNS servers are specified in /etc/resolv.conf. I tried to edit /etc/resolv.conf and put open dns servers as default DNS servers. But, my ISP supplies their DNS server address along with IP address for the system via DHCP. Every time my system renews its DHCP lease. my /etc/resolv.conf is also rewritten with their DNS address.
Search further

How to build a boot server

04/11/2009  
Relevance: 10.11
We are currently building a boot server at work so I thought I would share the process with you. I will cover setting up a basic DHCP server and TFTP server along with the configs needed to get them all working in cohorts. I will do this for both debian and centos. The last part of the article will show you how to add more OSes to the server.
Search further

The Perfect Server - Fedora 7

06/21/2007  
Relevance: 9.97
This is a detailed description about how to set up a Fedora 7 server that offers all services needed by ISPs and hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 32-bit version of Fedora 7, but should apply to the 64-bit version with very little modifications as well.
Search further

Showing 10 articles of total 34187 in database ( English).

[1]  2  3  4